[RE-wrenches] Sync problem
toddcory at finestplanet.com
toddcory at finestplanet.com
Fri Oct 30 09:08:35 PDT 2009
Hey Drake,
Did you look in the mate warning/error menus to check voltage/frequency?
Todd
On Thursday, October 29, 2009 4:25pm, drake.chamberlin at redwoodalliance.org said:
> Hello Wrenches,
>
> I was under the impression that he Honda EU series of inverter generators
> could synchronize with the grid tie VFX inverters. I tried to do this
> today with a 2000 EU, and the inverter would not accept the power. The
> generator has low hours on it.
>
> Does anyone know why the two won't sync? Are others having success with
> this combination? Has anyone else had this problem? Does the generator
> have any settings?
>
> Thank you,
>
> Drake
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20091030/b7f0a89a/attachment-0003.html>
More information about the RE-wrenches
mailing list