[RE-wrenches] Sync problem

drake.chamberlin at redwoodalliance.org drake.chamberlin at redwoodalliance.org
Fri Oct 30 11:55:29 PDT 2009


Thanks Randy. The eco throttle is off.


Drake,
>
> Is the Eco Throttle turned off?  If it's on, the generator is waiting
> for a load to come up to voltage, and the inverter is waiting for
> voltage to connect...
>
> Good luck,
>
> Randy Brooks
> Brooks Solar, Inc.
> Solar Power for People
> 140 Columbia View
> Chelan, WA  98816
> 509-682-9646
> Randy at BrooksSolar.com
> www.BrooksSolar.com
>
> On Oct 29, 2009, at 4:25 PM, drake.chamberlin at redwoodalliance.org wrote:
>
>> Hello Wrenches,
>>
>> I was under the impression that he Honda EU series of inverter
>> generators
>> could synchronize with the grid tie VFX inverters. I tried to do this
>> today with a 2000 EU, and the inverter would not accept the power. The
>> generator has low hours on it.
>>
>> Does anyone know why the two won't sync? Are others having success
>> with
>> this combination?  Has anyone else had this problem?  Does the
>> generator
>> have any settings?
>>
>> Thank you,
>>
>> Drake
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-
>> wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>





More information about the RE-wrenches mailing list