[RE-wrenches] Craftsman 82062 DC/AC Amp Clamp

[Howie Michaelson]

I second the Mastech (MS2108) - cheap and effective.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270287417877

Howie
-- 
Howie Michaelson
NABCEP Certified Solar PV Installer™

Sun Catcher, LLC
Renewable Energy Systems Sales and Service
VT Solar & Wind Incentive Program Partner
http://www.SunCatcherVT.com
(cell) 802-272-0004
(home) 802-439-6096


On Tue, July 21, 2009 1:02 pm, Max Balchowsky wrote:
>
> Joel, the best "tool" Investment I ever made was my Fluke 336 (had it for
> years until someone wanted it bad enough to steal), I replaced it with a
> 337 and have a Mastech MS2138R as a back up, both have served me
> well......
>
> Max Balchowsky
> SEE Systems
> Newport Beach, Ca.92662
> 760-403-6810
>
>
>
> ----- Original Message ----
> From: Joel Davidson <joel.davidson at sbcglobal.net>
> To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
> Sent: Tuesday, July 21, 2009 7:40:34 AM
> Subject: [RE-wrenches] Craftsman 82062 DC/AC Amp Clamp
>
> Wrenches,
>
> I really like my little Craftsman 82062 Multi-Meter with DC/AC Amp Clamp
> because it has a wide range, measures amps, volts, continuity, and low
> price. It's a handy little all-in-one trouble-shooting tool - when it
> works. The trouble is it does not stand up to field use (cheap). I'm
> really careful (even have the original cheap plastic case in brand new
> condition) but have gone through 3 meters in a few years. Any
> recommendations for a small multi-meter with a small DC amp clamp for
> getting into tight spaces? As always, thank you very much for your advice.
>
> Joel Davidson
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>