[RE-wrenches] String Combiners for a-Si modules

[Peter Parrish]

We are doing an engineering design for a large scale PV ground mount system
based on a-Si modules. Since the Isc of the modules is 1.5 A, instead of 7-8
A of typical c-Si modules, are there special low-current combiners out
there? Does each string need an overcurrent protection device? Any help with
a-Si based system design would be greatly appreciated.

                                                     
Peter T. Parrish, Ph.D., President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
CA Lic. 854779, NABCEP Cert. 031806-26
peter.parrish at calsolareng.com  
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885