[RE-wrenches] Craftsman 82062 DC/AC Amp Clamp

[Max Balchowsky]

Joel, the best "tool" Investment I ever made was my Fluke 336 (had it for years until someone wanted it bad enough to steal), I replaced it with a 337 and have a Mastech MS2138R as a back up, both have served me well...... 

Max Balchowsky
SEE Systems
Newport Beach, Ca.92662
760-403-6810



----- Original Message ----
From: Joel Davidson <joel.davidson at sbcglobal.net>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Tuesday, July 21, 2009 7:40:34 AM
Subject: [RE-wrenches] Craftsman 82062 DC/AC Amp Clamp

Wrenches,

I really like my little Craftsman 82062 Multi-Meter with DC/AC Amp Clamp because it has a wide range, measures amps, volts, continuity, and low price. It's a handy little all-in-one trouble-shooting tool - when it works. The trouble is it does not stand up to field use (cheap). I'm really careful (even have the original cheap plastic case in brand new condition) but have gone through 3 meters in a few years. Any recommendations for a small multi-meter with a small DC amp clamp for getting into tight spaces? As always, thank you very much for your advice.

Joel Davidson 
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org