Mate 2 & FN DC Flex net memory loss [RE-wrenches]
Todd Cory, Mt. Shasta Energy Services
toddcory at finestplanet.com
Sat May 31 19:20:01 PDT 2008
<x-flowed>
Have you checked the battery in the mate? (I think there is one in there.)
Todd
Blair May wrote:
>Any one else having issues w/ the Mate 2 loosing its memory when un
>plugged to re poll? I am using this in conjunction the DC FN. The mate
>has FW Rev. 4.04 & screen Rev.4.22.
> I loose the clock settings & the battery capacity settings. The
>generator also does not seem to be starting at low battery voltage
>settings. I do have the old oval mate that has not had the software
>upgrade at the site & that will start the gen & yes the new M2 is set
>in the AGS mode to "ON", for the proper port, P1 & set in auto off.
> Any insights would be greatly appreciated. Thanks. Tump
>
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list