XW generator start question [RE-wrenches]
Warren Lauzon
windsun at wind-sun.com
Fri Apr 25 09:30:18 PDT 2008
<x-flowed>
Is that software version in the current units, or are there possibly still
some on distributor shelves with the old version?
..................................................................................................
Northern Arizona Wind & Sun - Electricity From The Sun
..................................................................................................
----- Original Message -----
From: "Mark Edmunds" <mark.edmunds at xantrex.com>
To: <RE-wrenches at topica.com>
Sent: Friday, April 25, 2008 8:57 AM
Subject: RE: XW generator start question [RE-wrenches]
>
> Hi Dan, Jay
>
>
> You have the correct information Dan - the original design did need the
> "run" signal, even with 2 wire units - the software upgrade we now have
> will allow the system to look at the AC2 voltage to determine that the
> generator is running so it can be a true 2 wire installation.
>
> Cheers,
>
> Mark
>
>
>
> Mark Edmunds
> Xantrex Technology Inc.
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list