Roof top J-boxes [RE-wrenches]
Daryl DeJoy
penobscotsolar at midmaine.com
Fri Apr 18 10:13:02 PDT 2008
We have installed one SolaDeck so far. It is easy to install, even on post
shingled roofs and comes with a grounding block. I recommend it.
Daryl DeJoy
NABCEP Certified PV installer
Penobscot Solar Design
>
> Steve,
>
> The "SolaDeck" product may work well for you. Here is the manufacturer's
> site:
>
> www.commdeck.com
>
> David C. Brearley
> NABCEP Certified Solar Installer
>
> Meridian Energy Systems, Inc. (TECL: 24461)
> 2300 S. Lamar Blvd., Ste. 107
> Austin, Texas 78704
> P: 512-448-0055
> F: 512-448-0045
> david at meridiansolar.com
> www.meridiansolar.com
>
>
> -----Original Message-----
> From: Steve Johnson [mailto:stevejohnson at comcast.net]
> Sent: Friday, April 18, 2008 7:55 AM
> To: RE-wrenches at topica.com
> Subject: Roof top J-boxes [RE-wrenches]
>
>
> there was a thread some time back about junction boxes where you take
> the wiring through the roof. we are using a WP aluminum die cast bell
> box (regular outdoor box)mounted to a rail side under the array and
> going through the roof with sealtite through a 3/4" neoprene roofing
> boot about 18" away.
>
> Occasionally we come out of the bell box with EMT, right out the back.
> I like this better but doesn't work well lots of times since the roof
> boot causes the box to be higher than the rail or difficulty in
> alignment.
>
> I don't like this solution. I remember someone was just mounting the
> bell box directly to the roof. The would be neater and simpler.
>
> Any suggestions?
>
> Steve Johnson
> LightWave Solar Electric
> Nashville, Tennessee
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature
> database 3036 (20080418) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature
> database 3038 (20080418) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list