Roof top J-boxes [RE-wrenches]
David Brearley
david at meridiansolar.com
Fri Apr 18 06:38:34 PDT 2008
Steve,
The "SolaDeck" product may work well for you. Here is the manufacturer's
site:
www.commdeck.com
David C. Brearley
NABCEP Certified Solar Installer
Meridian Energy Systems, Inc. (TECL: 24461)
2300 S. Lamar Blvd., Ste. 107
Austin, Texas 78704
P: 512-448-0055
F: 512-448-0045
david at meridiansolar.com
www.meridiansolar.com
-----Original Message-----
From: Steve Johnson [mailto:stevejohnson at comcast.net]
Sent: Friday, April 18, 2008 7:55 AM
To: RE-wrenches at topica.com
Subject: Roof top J-boxes [RE-wrenches]
there was a thread some time back about junction boxes where you take
the wiring through the roof. we are using a WP aluminum die cast bell
box (regular outdoor box)mounted to a rail side under the array and
going through the roof with sealtite through a 3/4" neoprene roofing
boot about 18" away.
Occasionally we come out of the bell box with EMT, right out the back.
I like this better but doesn't work well lots of times since the roof
boot causes the box to be higher than the rail or difficulty in
alignment.
I don't like this solution. I remember someone was just mounting the
bell box directly to the roof. The would be neater and simpler.
Any suggestions?
Steve Johnson
LightWave Solar Electric
Nashville, Tennessee
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 3036 (20080418) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 3038 (20080418) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list