broken j-box [RE-wrenches]

[Larry Crutcher, Starlight Solar]

Hello Ron,

I have some J box's in stock. On Monday I will take a picture for you to see if you can use it.
Larry Crutcher
General Manager
Starlight Solar

Retail Store & Shipping: 2998 Shari Ave. Yuma, AZ 85365
Phone (928) 941-1660      Fax (928) 342-9103

Mailing Address:11279 S. Glenwood Ave, Box 11114, Yuma, AZ 85367
Renewable Energy Products for Home, Business and Recreational Vehicles
powered by STARLIGHT
>
>
> Hi Wrenches
> A clients horses got tangled up in an exposed cable and ripped the
> teck cable along with the combiner box right off the pole including
> all the mc cables running into a 10 panel array. The cable was left
> exposed two years ago after an installation and the customer was
> supposed to back fill around it but obviously didn't. I was able to
> repair/replace all the cables except on one panel where the j-box
> terminal was broken including the circuit board inside. I'm asking if
> anyone can suggest ways and means to repair this rather than replace
> the expensive 150/24 panel which is unavailable in N.A. right now
> anyway as far as I know. It would really be a shame to have to fit
> another panel into the array that would change the aesthetics as it's
> a really nice looking array.
>
> I've posted some pics here: http://solareagle.com/iso.html
>
> Two of the ribbon connectors have been severed just where they go
> under the edge of the j-box but if the box was separated from the
> panel it looks like it might be possible to re-join (solder) them
> back on. The circuit board could be epoxied back together along with
> the connector broken off the side. The ideal solution would be to get
> another J-box from Isofoton -- has anyone had experience replacing
> those?
>
> Ron Young
> earthRight Products - Solareagle.com

[Non-text portions of this message have been removed]


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------