solar thermal mounting feet for flat roof [RE-wrenches]

[Jeremy Rodriguez]

Kurt Albershardt wrote:
> 
> Any recommendations for mounting feet/piers to support a large solar 
> thermal array on a flat roof?  This will be an extensive green roof 
> system, so we need to mount something to the concrete deck before the 
> waterproofing (MM6125) is applied and the insulation, etc. gets 
> installed.  I'm thinking either drill & epoxy with allthread or perhaps 
> old fashioned concrete piers epoxied to the deck, but perhaps there is a 
> better option that will give me at least 6" of rise?
> 
> 
> --thanks
> 
> 
> 
> 
> 
> .
How about flat top steel stanoffs? See Unirac or DPW


Jeremy Rodriguez
All Solar, CO USA


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------