[RE-wrenches] Wind Loads by state

[Darryl Thayer]

Retscreen has some wind data, and a wind calculator, however it has the same problem as it has with solar, in that it is difficult to modeling using there code and you are very limited in applications.   

What I would like to see would be a CFD derived emperical model of micro siting.  mode


--- On Wed, 12/17/08, Jason Lombard <openhandsolar at gmail.com> wrote:

> From: Jason Lombard <openhandsolar at gmail.com>
> Subject: [RE-wrenches] Wind Loads by state
> To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
> Date: Wednesday, December 17, 2008, 3:26 PM
> All,
> 
> I have been looking for a website that has good information
> on a state level
> of wind loads. I would like something that has details like
> DESIRE has for
> state rebates but I imagine no one has created it.
> 
> Any ideas or thoughts?
> 
> -- 
> Jason Lombard
> Open Hand Solar LLC.
> Certified Sustainable Building Adviser
> openhandsolar at gmail.com
> 505 795 8646
> 
> "I'd put my money on solar energy… I hope we
> don't have to wait 'til oil and
> coal run out before we tackle that."
> 
> —Thomas Edison
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org