[RE-wrenches] Quick Mount PV flat-tile mount

[Jason Lombard]

I have not used the QMPV system on flat tile, and I wanted to suggest Tile
Trac if you do one again. It is much easier and only a small 3/8" hole to
drill which equates to less leakage problems.

Just my 2w.

On Sun, Dec 7, 2008 at 9:09 PM, Kelly Keilwitz, Whidbey Sun & Wind <
kelly at whidbeysunwind.com> wrote:

> Hi All,
> Anyone use the Quick-Mount PV system for tile? We don't do many tile roofs,
> but we have an upcoming job with flat cement tiles. In the past we've
> pulled
> the tiles, placed posts and flashed, cutting the tile to fit. It's a pain.
> The Quick Mount PV system, www.quickmountpv.com, replaces a tile with a
> exact-fit plastic flashing with integral flange that goes over the post. It
> sounds like it'll save a lot of time - if it works.
> Thanks,
> -Kelly
>
> Kelly Keilwitz, P.E.
> Whidbey Sun & Wind, LLC
> Renewable Energy Systems
> NABCEP Certified PV Installer
> 987 Wanamaker Rd,
> Coupeville, WA 98239
> PH & FAX 360-678-7131
> sunwind at whidbeysunwind.com
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>


-- 
Jason Lombard / CSBA
Open Hand Solar LLC.
Pecos, NM. 87552
505 795 8646
openhandsolar at gmail.com

"I'd put my money on solar energy… I hope we don't have to wait 'til oil and
coal run out before we tackle that."

—Thomas Edison
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20081208/287f326c/attachment-0003.html>