XW6048 running a 1HP pump? [RE-wrenches]

[Warren Lauzon]

<x-flowed>

That seems a bit high, even for an AC pump. 1 HP is equal to 746 watts (not 
a true direct conversion, but close enough). So even if surge is 4x that, 
would 3000 watts/VA

..................................................................................................
----- Original Message ----- 
From: "Chris Daum" <info at oasismontana.com>
To: <RE-wrenches at topica.com>
Sent: Sunday, June 08, 2008 2:46 PM
Subject: RE: XW6048 running a 1HP pump? [RE-wrenches]


>
> Sub pump.  I'm figuring a surge around 9600 - 10000W at 240 VAC.  Does 
> that
> ring true?
>
> Chris Daum
> Oasis Montana Inc.
> 406-777-4309 local line
>
>
>
> -----Original Message-----
> From: daryl_solar at yahoo.com [mailto:daryl_solar at yahoo.com]
> Sent: Sunday, June 08, 2008 12:08 PM
> To: RE-wrenches at topica.com
> Subject: Re: XW6048 running a 1HP pump? [RE-wrenches]
>
>
> Hi Chris
> Is this a submersible or surface pump?
> I have started and run a 1 hp blower on an XW6048, but this is not a pump,
> which I believe can have a much larger starting surge.  I have also run a
> speed drive and larger motor, again not the same.  If I get a chance I 
> will
> start a pump, but I do not know what the HP is.  Wish I could help,
>
> BTW where can person get 24 v cfls
> Darryl
>
>
> --- On Sun, 6/8/08, Chris Daum <info at oasismontana.com> wrote:
>
>> From: Chris Daum <info at oasismontana.com>
>> Subject: XW6048 running a 1HP pump? [RE-wrenches]
>> To: RE-wrenches at topica.com
>> Date: Sunday, June 8, 2008, 11:24 AM
>> Dear Folks:
>>
>> Is anyone using the XW6048 to run a 240VAC 1HP pump motor?
>> Seems to me like
>> the surge on that is borderline effective....
>>
>> Chris Daum
>> Oasis Montana Inc.
>> 406-777-4309
>> 406-777-0830 fax
>> www.oasismontana.com
>>
>>
>>
>> - - - -
>> Hosted by Home Power magazine
>>
>> To send a message: RE-wrenches at topica.com
>>
>> Archive of previous messages:
>> http://lists.topica.com/lists/RE-wrenches/read
>>
>> List rules & how to change your email address:
>> www.mrsharkey.com/wrenches/etiquette.php
>>
>> Check out participant bios: www.mrsharkey.com/wrenches/
>>
>> Moderator: michael.welch at homepower.com
>
>
>
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: 
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: 
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address: 
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
> 


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------


</x-flowed>