XW6048 running a 1HP pump? [RE-wrenches]

[Chris Daum]

 Sub pump.  I'm figuring a surge around 9600 - 10000W at 240 VAC.  Does that
ring true?

Chris Daum
Oasis Montana Inc.
406-777-4309 local line

 

-----Original Message-----
From: daryl_solar at yahoo.com [mailto:daryl_solar at yahoo.com] 
Sent: Sunday, June 08, 2008 12:08 PM
To: RE-wrenches at topica.com
Subject: Re: XW6048 running a 1HP pump? [RE-wrenches]


Hi Chris
Is this a submersible or surface pump? 
I have started and run a 1 hp blower on an XW6048, but this is not a pump,
which I believe can have a much larger starting surge.  I have also run a
speed drive and larger motor, again not the same.  If I get a chance I will
start a pump, but I do not know what the HP is.  Wish I could help, 

BTW where can person get 24 v cfls
Darryl


--- On Sun, 6/8/08, Chris Daum <info at oasismontana.com> wrote:

> From: Chris Daum <info at oasismontana.com>
> Subject: XW6048 running a 1HP pump? [RE-wrenches]
> To: RE-wrenches at topica.com
> Date: Sunday, June 8, 2008, 11:24 AM
> Dear Folks:
> 
> Is anyone using the XW6048 to run a 240VAC 1HP pump motor? 
> Seems to me like
> the surge on that is borderline effective....
> 
> Chris Daum
> Oasis Montana Inc.
> 406-777-4309 
> 406-777-0830 fax
> www.oasismontana.com
>  
> 
> 
> - - - -
> Hosted by Home Power magazine
> 
> To send a message: RE-wrenches at topica.com
> 
> Archive of previous messages:
> http://lists.topica.com/lists/RE-wrenches/read
> 
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
> 
> Check out participant bios: www.mrsharkey.com/wrenches/
> 
> Moderator: michael.welch at homepower.com


      


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------