XW6048 running a 1HP pump? [RE-wrenches]
daryl_solar at yahoo.com
daryl_solar at yahoo.com
Sun Jun 8 11:07:32 PDT 2008
Hi Chris
Is this a submersible or surface pump?
I have started and run a 1 hp blower on an XW6048, but this is not a pump, which I believe can have a much larger starting surge. I have also run a speed drive and larger motor, again not the same. If I get a chance I will start a pump, but I do not know what the HP is. Wish I could help,
BTW where can person get 24 v cfls
Darryl
--- On Sun, 6/8/08, Chris Daum <info at oasismontana.com> wrote:
> From: Chris Daum <info at oasismontana.com>
> Subject: XW6048 running a 1HP pump? [RE-wrenches]
> To: RE-wrenches at topica.com
> Date: Sunday, June 8, 2008, 11:24 AM
> Dear Folks:
>
> Is anyone using the XW6048 to run a 240VAC 1HP pump motor?
> Seems to me like
> the surge on that is borderline effective....
>
> Chris Daum
> Oasis Montana Inc.
> 406-777-4309
> 406-777-0830 fax
> www.oasismontana.com
>
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list