Endurance wind [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Thu Feb 21 14:22:25 PST 2008
<x-flowed>
Hi Christopher,
That last bit about $20K, we'll, maybe I won't be putting one of
these in soon.
In regards to the SWWP, are you speaking of the HV models?
jay
On Feb 21, 2008, at 2:06 PM, Christopher Freitas --- OutBack Power
wrote:
>
> Jay -
>
> Yes it should work well for AC coupled applications. We have done
> these
> with the Southwest Windpower turbines - which have AC output - as well
> as some hydro-turbines as well - so its very similar.
>
> This wind-turbine has the oddity of switching its output from 120 to
> 240VAC at higher power - but that should not really be a big deal
> either
> - except for metering (would require a Form-12S type meter I would
> think).
>
> This doesn't look like a cheap unit - my guess is $20,000 for the
> turbine... and then there is the cost of a tower which can handle the
> size and weight of this unit. It also has a dual disc brake system
> driven by an air compressor, gearbox and a full control panel - so
> - yes
> no inverter is required - but lots of controls...
>
> Christopher
>
>
>
> EMAIL CONFIDENTIALITY NOTICE:
> The preceding message (including attachments) is covered by the
> Electronic Communication
> Privacy Act, 18 U.S.C. sections 2510-2521, is confidential, and may
> also be protected by
> attorney-client or other privilege. If you believe that it has been
> sent to you in error,
> please do not read it. If you are not the intended recipient,you
> are hereby notified
> that any retention, dissemination, distribution, or copying of this
> communication is
> strictly prohibited. Please reply to the sender that you have
> received the message in
> error, then delete it. Thank you.
>
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://lists.topica.com/lists/RE-
> wrenches/read
>
> List rules & how to change your email address: www.mrsharkey.com/
> wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list