Roof top J-boxes [RE-wrenches]

[Steve Johnson]

there was a thread some time back about junction boxes where you take 
the wiring through the roof.  we are using a WP aluminum die cast bell 
box (regular outdoor box)mounted to a rail side under the array and 
going through the roof with sealtite through a 3/4" neoprene roofing 
boot about 18" away.

Occasionally we come out of the bell box with EMT, right out the back.  
I like this better but doesn't work well lots of times since the roof 
boot causes the box to be higher than the rail or difficulty in 
alignment.

I don't like this solution.  I remember someone was just mounting the 
bell box directly to the roof.  The would be neater and simpler.

Any suggestions?

Steve Johnson
LightWave Solar Electric
Nashville, Tennessee


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------