SMA Sunny Island - anyone doing three phase? [RE-wrenches]
Larry Crutcher, Starlight Solar
larry at starlightsolar.com
Wed Oct 24 09:39:05 PDT 2007
John Berdner wrote:
>
> Larry/Wrenches:
>
> Jeff is correct. We can not do a Multi-cluster system in the US with UL
> Listed equipment (yet).
> If the system is outside the US, or where UL is not required, then you
> can use European versions set for 60 hz. This gives you 230/400 Vac, 3
> phase @ 60 Hz. You can then use a custom transformer or 3 autoformers
> to get it to 120/208 or 277/480. If you have further questions please
> feel free to contact me offline.
>
> Best Regards,
>
> John Berdner
John,
Do you have any time line for when the SI5048 will be ready for
multi-clustering?
Larry Crutcher
Starlight Solar
Yuma, AZ
Renewable Energy Products Powered by STARLIGHT
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list