Out in the outback with OutBack [RE-wrenches]

Joe Felker joe.felker at alumni.stevens-tech.edu
Tue Apr 17 04:22:01 PDT 2007


Another issue is the inverter's MPPT (Max Power Point Tracking).  That 
will need to be diasabled (via software)when connected directly to a DC 
generator.

Joe
Todd Cory wrote:
> 
> This still could be problematic. When the grid comes up, of the DC genny 
> 
> is not shut down, you could find the inverter selling generator power to 
> 
> the grid.
> 
> Todd
> 
> 
> Ezra Auerbach, DragonSun Consulting wrote:
> 
> >
> > Hi folks,
> >
> > A note on this string - there are auto start DC generators on the  
> > market which could be useful with grid tied battery based systems  
> > which need extended run time. A supplier of this type of generator  
> > (but clearly NOT the only supplier) is Alpha Technologies  
> > (www.alpha.com). One generator I particularly like is a Honda based  
> > AlphaGen which produces a steady 56 Vdc. It is not intended to be a  
> > multi-stage charger, the PV will take care of that. They are quiet,  
> > and would not need to interface with the FX inverters single AC input.
> >
> > Regards,
> >
> >
> > Ezra Auerbach
> >
> 



Joe Felker

Engineering Manager
NABCEP Certified Solar PV Installer
The Solar Center


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------





More information about the RE-wrenches mailing list