Batten roofs [RE-wrenches]

[Max Balchowsky]

Check caddy. I don't have the info with me ( I'm on the road again) but
we've used a caddy clip that was designed as a beam clamp that worked
well... 


Max Balchowsky
SEE Systems
100 S. Sunrise wy # 285
Palm Springs, Ca. 92262
760-403-6810
 
"Creating a Better Future For The Next Generation"

-----Original Message-----
From: Andrew Truitt [mailto:atruitt at gmail.com] 
Sent: Tuesday, February 27, 2007 7:14 PM
To: RE-wrenches at topica.com
Subject: Batten roofs [RE-wrenches]

Does anyone know of a non-invasive method for mounting L-feet to a copper
batten roof?  The battens are 2" x 2", 22" o.c. and sit on 3/4"
ply with 2" x 4", 24" o.c. framing.  Our roofer will only warranty roof
penetrations if he can use 6" welded flashings which would cost a lot (10 kW
system) and would raise the profile more than we would like.  We are
basically looking for the equivalent of S-5! clips for 2" wide standing
seams.

Thanks in advance for any help because I am stumped!

--
Andrew Truitt
System Designer/Lead Installer
Standard Solar Inc.
15200 Shady Grove Rd. Ste. 202
Rockville, MD 20850
Office: (301) 296 - 4373
Cell: (415) 290 - 8240
Fax: (301) 296 - 4548
andrewtruitt at standardsolar.com


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------