AGS problems with Outback system [RE-wrenches]

[Hugh Piggott]

<x-flowed>

At 12:36 -0800 4/12/07, Jonah Liebes wrote:
>I have not tried that. I keep the gen itself set to Auto and use the mate to
>toggle between manual and auto as needed. It is strange that the gen cycling
>occurs even when the AGS in the mate is set to manual. I hear the relay
>click so I know the FX is sending the signal- even in manual mode.

I wonder what you have set for the generator size (INPUT AC2 gen), 
and whether it is overloaded.  I wonder if the AC voltage drops to 
the point that the FX rejects its input, and shuts it off?
-- 
Hugh Piggott

Scoraig Wind Electric

http://www.scoraigwind.co.uk


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------

</x-flowed>