AGS problems with Outback system [RE-wrenches]
Jonah Liebes
jliebes at heliopower.com
Tue Dec 4 12:36:26 PST 2007
I have not tried that. I keep the gen itself set to Auto and use the mate to
toggle between manual and auto as needed. It is strange that the gen cycling
occurs even when the AGS in the mate is set to manual. I hear the relay
click so I know the FX is sending the signal- even in manual mode.
Thanks again,
Jonah Liebes
NABCEPT Cert.
Regional Operations Director
www.heliopower.com
Office 951.677.7755
Mobile 760.908.7308
Fax 951.677.9559
-----Original Message-----
From: Jay Peltz, Peltz Power [mailto:jay at asis.com]
Sent: Tuesday, December 04, 2007 12:09 PM
To: RE-wrenches at topica.com
Subject: Re: AGS problems with Outback system [RE-wrenches]
HI Jonah,
1 question, if you start the generator manually ie at the generator,
you don't have these problems correct?
jay
peltz power
On Dec 4, 2007, at 11:37 AM, Jonah Liebes wrote:
>
> Thanks Jay. I asked Outback about sending in the mate. They
> confirmed that I
> had the most recent firmware and did not feel a mate switch was in
> order.
> However, your point is well taken and I will follow that route next
> if I
> can't solve the problem soon.
>
> Thanks for the help.
>
> Jonah Liebes
> NABCEPT Cert.
> Regional Operations Director
> www.heliopower.com
> Office 951.677.7755
> Mobile 760.908.7308
> Fax 951.677.9559
>
>
>
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list