Bonding for Lightning [RE-wrenches]
Mark Frye
markf at berkeleysolar.com
Tue Oct 9 11:06:43 PDT 2007
My understanding is that a ground electrode system (GES) for a lightning
protection system (LPS)must be bonded to every other GES for the
structure.
But, if the "LPS" consists of only an air gap where there is normally no
continuity between the equipment grounding conductor coming from the
frames and the GES, can it be said that this is not actually a LPS and
therefore the "LPS GES" does not have to be bonded to other GES's?
Berkeley Solar Electric Systems
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list