Xantrex 3.0 [RE-wrenches]

Mark Edmunds mark.edmunds at xantrex.com
Fri Oct 13 16:08:47 PDT 2006


Small correction from previous post... New GT3.0 p/n should be 864-0002
as shown below:


With regard to the wiring box...it has changed slightly from the early
GT3.0's.  All new GT Series inverters (GT2.5, GT3.0 with part #
864-0002, GT3.3, and GT3.8) share the same wiring box design...the only
exception is the original GT3.0 design (part# 864-0001).  To date we
haven't had enough failures to build up exchange refurbs, so this is why
you got a new GT3.0 in exchange for the 864-0001 version of the GT3.0.
Sorry for the inconvenience with this. 


Cheers,

Mark


Mark Edmunds
Xantrex Technology Inc.


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------







More information about the RE-wrenches mailing list