Kaneka GSA? [RE-wrenches]

[Brian Teitelbaum]

Hi Bill,

Maybe I'm reading the Square-D spec sheet too conservatively, but nowhere in
it do they give approval for combining the three legs for output to a single
inverter. They do show a diagram with one inverter ("load") per pole and
they do say "one inverter may be connected to each pole of the switch".
Elsewhere they say "one 2500 Watt inverter per pole".

I would love to be wrong on this, since as Doug stated, it would be the
cheapest way of using three stings on a single inverter. I don't see any
problem electrically with this set-up, but since the manufacturer is so
specific about the other details of the switch's rating, I have not been
recommending it's use as a combiner.

This may need clarification from John B. at SMA. John?

Brian Teitelbaum
AEE Solar


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------