Info on arco panels? [RE-wrenches]

[Jay Peltz, Peltz Power]

<x-flowed>

Hi Allan,

Another way is to reuse the existing stud.

clean the old surface on the panel.
coil a piece of soldier on the panel, now face down
heat the stud with a torch holding it with plyers.
when hot, hold onto the soldier and let cool.

works like a champ, done in lots of times.

jay

peltz power


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------




</x-flowed>