MX-60 operating voltage limit [RE-wrenches]

[Todd Cory, Mt. Shasta Energy Services]

<x-flowed>

The side label on the latest one I installed last week (if I recall 
correctly)  said the max was 150. I've heard the limit is the voltage 
rating on the caps, not the fets.

Todd


Kelly Larson wrote:

>
> Dear wrenches,
>
> Recently I have heard two wrenches mention that the MX-60 can 
> withstand voltages up to 150V.  One even said that the real upper 
> limit is 200V because the fets are designed for that.  Only a few 
> months ago I called Outback and was told that at 140V the MX-60 would 
> be out of warranty and likely smoke, and that it shut down at 135V.  
> Has there been a change in this recently?  Maybe you could chime in, 
> Christopher?
>
> Thank you for your replies in advance,
> Kelly
>


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>