MX-60 operating voltage limit [RE-wrenches]

[Kelly Larson]

<x-flowed>

Dear wrenches,

Recently I have heard two wrenches mention that the MX-60 can withstand 
voltages up to 150V.  One even said that the real upper limit is 200V 
because the fets are designed for that.  Only a few months ago I called 
Outback and was told that at 140V the MX-60 would be out of warranty and 
likely smoke, and that it shut down at 135V.  Has there been a change in 
this recently?  Maybe you could chime in, Christopher?

Thank you for your replies in advance,
Kelly


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------


</x-flowed>