2 HP pump [RE-wrenches]

[Todd Cory, Mt. Shasta Energy Services]

<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Here’s your chance to tell some of the most important names in 
retailing and household products what’s on your mind. You could win 
a free iPod Nano by signing up for our new consumer opinion panel 
and filling out a brief survey.
http://click.topica.com/caaeTvObz8Qcsbz9JC9a/ HomeWorldResearch
-------------------------------------------------------------------

It is a three wire pump... 240 volts (thats why the stacked 3648's), 
Gould pump, #8 wire down the hole. The well is 480', static level at 
440' (!) so is cannot be downsized to a 1 or even 1.5 HP, plus it is 
already installed.

I guess if dual 3648's won't start, it the new/used power panel I just 
found out about consisting of two SW2512's would never cut it either right?

I suppose the Outback folks are drinking beer at MREF... lucky bastards!

Todd




Jay Peltz, Peltz Power wrote:

> Hi Todd,
>
> A number of variables.
> 2 or 3 wire start?
> 120 or 240?
> make of motor makes a big difference.
> length/size of wire run
>
> I have found a huge difference in efficiency of pumps.  For example  
> installing a SQ tomorrow.  The 1/2hp vs the 3/4hp was about 300% more  
> efficient with the 3/4hp.
> But have found similar differences with standard motors.
>
> So even if it will run it, still might not be a good idea.
>
> Mostly I install SQ's, although generally not as efficient as  
> standard pumps, but the ease of starting means just fewer problems.
>
> my 2 cents,
>
> jay
>
> peltz power

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
FREE Zoobooks Elephants ISSUE and tiger POSTER!
Is your child reading? Zoobooks is guaranteed to improve 
your child’s reading skills. Click below to sign up now!
http://click.topica.com/caaeTvYbz8Qcsbz9JC9f/ Zoobooks
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>