Backfeeding a 200 amp panel with an Outback 3048 [RE-wrenches]
Andrew Truitt
atruitt at gmail.com
Wed Oct 11 10:48:24 PDT 2006
<x-flowed>
Is it legit to backfeed a 200 amp main panel with the 1 pole, 60 amp
breaker that is recommended for the Outback FXGT 3048 considering the
20% rule? I know that most of that amperage is pass through, as the
most a 3kW inverter should be able to produce at 120V is 25 amps, but
the manual says that the largest instantaneous output current is 70
amps.
--
Andrew Truitt
System Designer
Standard Solar Inc.
(301) 296 - 4373
andrewtruitt at standardsolar.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list