2 wire to 3 wire generator control [RE-wrenches]

[Dan Rice]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Sign up today for a No Annual Fee Discover® Platinum Card and get

0% Intro APR on Purchases & Balance Transfers for 8 Months, Up to 
2% Cashback Bonus® reward on your purchases & 100% fraud 
protection.
http://click.topica.com/caadtrVbz8Qcsbz9JC9a/DiscoverCard
-------------------------------------------------------------------

Mark,

Thanks for the info. Under what circumstances might one choose to upgrade?
What are the known bugs, if any, in Rev 4.10. What is the difference between
4.10 and 4.3 or 4.16? Is there a Xantrex document you can point  to that
outlines the changes in and advantages of these new versions?

Dan Rice
Abundant Sun, LLC.

----- Original Message ----- 
From: "Mark Edmunds" <mark.edmunds at xantrex.com>
To: <RE-wrenches at topica.com>
Sent: Monday, May 09, 2005 5:01 PM
Subject: RE: 2 wire to 3 wire generator control [RE-wrenches]


Hi Dan and Darryl,

There are upgrades available for older SW's, now at version 4.3 or 4.16
depending on who listed the inverter (ETL, UL or CSA)

Generally the SW (and family) will stop the crank signal when the AC
voltage, as measured on the inverter's terminals, reaches about 80Vac. A
tripped breaker or bad connection between the Gen and inverter will
cause the starter to stay engaged longer, but the gen would never be
able to connect to the inverter in that case anyway.

Cheers,

Mark Edmunds
Xantrex Technology Inc.

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a Free T-Mobile Sidekick II plus $500 towards service! 
Click here.
http://click.topica.com/caaduFNbz8Qcsbz9JC9f/ProductTestPanel
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------


---
[This E-mail scanned for viruses by Declude Virus]