SPAM: Top of pole internal wiring [RE-wrenches]

[Gary Higbee]

<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caaegt3bz8Qcsbz9JC9a/PC PowerScan
-------------------------------------------------------------------

Wrenches,

What is the best way to exit wires from inside a top of pole PV mount? I've 
got a park project, and they don't want a conduit run up the side of the 
pole (concerns someone will break it--this is a vandalism-prone area). We'll 
have three runs of #6 coming up the inside of a 6" schedule 80 pole. The 
7/8" hole in the DP&W TOP mount will only take a 1/2" fitting, but we need 
1" conduit for the three #6's. If we drill a hole through the pole wall we 
can't use nonmetallic flex out the side, because the bend radius is too 
small.

We'll be combining two strings of four Unisolar ES-62's in a J-box up there. 
What's the best way to get from the inside of the pole to the box?

Thoughts?

Thank you!

Gary

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                     ~ Windstream Solar ~
     Gary Higbee  (gary at windstreamsolar.com)
                     (541 ) 607-1818 (Eugene)
                        (541) 954-3881 (Cell)
Solar, wind, and hydro site analysis and system design
    Components dealer and installation management
 Energy Trust of Oregon contracted system inspector
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Make phone calls with phone service from Packet8.Order VoIP
today & get Free Activation, Free Equipment & First Month 
Free! Packet8 30-day money back guarantee. 1-877-868-1135
http://click.topica.com/caaegt4bz8Qcsbz9JC9f/ TMONE
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------




</x-flowed>