14 Microfarad Capacitor [RE-wrenches]
Drake Chamberlin
solar at ecoisp.com
Wed Mar 30 07:27:47 PST 2005
<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Help us support US Troops – Just Register Here.
http://click.topica.com/caadjGFbz8Qcsbz9JC9a/Permission Data
-------------------------------------------------------------------
Hi Wrenches,
In an old thread, I had been looking for a very small ,14 Microfarad
capacitor for a motor. Since one of the proper size was unavailable, we
located small 10 and 4 Microfarad capacitors and wired them in
series. According to our sources, series was the best way to connect them,
that parallel would result in more capacitance than the sum of the two. (???)
Anyway, the motor seems to work to specification, pulling the correct
amperage and running with what appears to be normal power. There is
however a "clinking" noise associated with the motor now. Does anyone know
what that is about? All the bearings seem to be fine. Are we getting some
sort or reactive effect between the two capacitors?
This is not a critical issue, as we have replace the motor with a new
one. The old motor is for backup, and the investigation is to some degree
for the learning curve.
Thanks,
Drake
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get both the MiFi XM Satellite Radio and an Apple iPod for Free!
http://click.topica.com/caadlpdbz8Qcsbz9JC9f/ProductTestPanel
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-Wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list