interconnection question [RE-wrenches]

[Keith Cronin]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Your opinion counts! We're giving away ten $100 cash prizes!
A major food company wants to know what you think about a product 
& package design. Hurry, only ten $100 prizes left!
http://click.topica.com/caadbR9bz8Qcsbz9JC9a/Val Rad Survey
-------------------------------------------------------------------


Hey gang

 

This might be a Bill question: (no offense to any others- I just figured he
had the pulse of California fresh on his mind!)

 

If you were looking at putting a 50KW system on a building, and were going
to use a 45KW Trace unit, and they already had a 100 amp, 480 volt feeder on
the roof for mechanical equipment, what are the specific rules governing the
interconnection?

 

My mind says, I will be basically neutralizing the load, which is connected
to a distribution panel with a 600 amp electrical service. But, I know
looking at this, it would seem too easy to tie in to the panel on the roof,
and add a curb for the inverter.

 

Thanks!

 

Keith Cronin

President

Island Energy Solutions Inc.

270 Kuulei Rd. Suite 106

Kailua, HI 96734

808-262-3268 Tel

808-263-0338 Fax

keith at islandenergy.net

www.islandenergy.net

 

 

 


[Non-text portions of this message have been removed]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get both the MiFi XM Satellite Radio and an Apple iPod for Free! 
http://click.topica.com/caadazobz8Qcsbz9JC9f/ProductTestPanel 
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------