Hydro & Outback [RE-wrenches]

[Keith Cronin]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
We have the 42 Inch Plasma TV you've been looking for!!  Sony or 
Panasonic 42 Inch Plasma Wide Screen TV's. Put one up on your 
wall today!  Click Below
http://click.topica.com/caac8uBbz8Qcsbz9JC9a/ExclusiveRewards
-------------------------------------------------------------------


Hello gang

 

I have a client who we just installed a 7.7KW system with 6- 2500's with a
1600 AH battery bank. There is a 15KW Genny also as a topper for the
batteries. We don't enjoy burning fossil fuels.so..

 

There is a good source of water available for hydro, and want to know what
is the best avenue for interconnect? I realize if we are getting either AC
or DC out of the hydro it can make a difference. Feedback welcomed for both
scenarios...

 

Since the genny is taking the aux output on the Outback's, should I use the
MX60's aux and use relay's to meet the needs and have the dump load to
something (water heater/pool heater etc.). Should I take a couple of the
outback's off the system and use them for charging on the input and feed the
property on the output of all 6?

 

Or

 

Do I use DC hydro and a C60 to charge the batteries and send the power to
another load when the batteries are topped off?

 

Any suggestions would be sincerely appreciated on the hierarchy of the
sequencing of things!

 

 

Keith Cronin

President

Island Energy Solutions Inc.

270 Kuulei Rd. Suite 106

Kailua, HI 96734

808-262-3268 Tel

808-263-0338 Fax

keith at islandenergy.net

www.islandenergy.net

 

 

 


[Non-text portions of this message have been removed]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC Take a 
2-minute PC health check-up at no charge!
http://click.topica.com/caadaSrbz8Qcsbz9JC9f/PC Powerscan
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------