More on the DC Breaker Box [RE-wrenches]
Allan Sindelar
allan at positiveenergysolar.com
Mon Feb 14 14:20:16 PST 2005
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
We have the 42 Inch Plasma TV you've been looking for!! Sony or
Panasonic 42 Inch Plasma Wide Screen TV's. Put one up on your
wall today! Click Below
http://click.topica.com/caac8uBbz8Qcsbz9JC9a/ExclusiveRewards
-------------------------------------------------------------------
Wrenches,
Here's more good stuff from Robin Gudgel at Outback on the use of the
PSPV/PSSB as a general purpose high voltage DC subpanel.
Allan @+E
----- Original Message -----
From: "Robin Gudgel" <rgudgel at outbackpower.com>
> Allan, Thanks for the posting. The breakers are actually ETL listed up
> to 150 volts for the 10-15 amp range. The rest are UL listed for 125
> volts DC.
> The PSPV is kind of pricey, but it isn't a mass produced steel box rated
> for 48 volts using thermal breakers. Installers should use the Square D
> boxes when it applies and save our stuff for when it is really needed.
> You can mix AC and DC breakers in our PSSB box also. It has the extra
> cover so that wires are not exposed. We have not sold the PSSB box
> without the 6 ganged breaker, but I suppose we could figure out a price?
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.8 - Release Date: 02/14/2005
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Show your pride with a free* USA T-shirt. Click here to confirm
your address.
http://click.topica.com/caac8udbz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list