Mounting boxes on large poles [RE-wrenches]
David Blecker
blecker at seventhgenergy.org
Fri Apr 30 09:51:33 PDT 2004
<x-flowed>
===========================================================
Sponsor a child today through Children International.
Give a desperately poor child hope for a brighter future.
For only $18 a month you can make a difference!
http://click.topica.com/caab595bz8Qcsbz9JC9a/ Children's Int'l
===========================================================
Ken,
You could drill and tap the pipe and then mount uni-strut channel to
support the box. Easy, fast, secure.
Dave
At 11:36 AM 4/30/2004, you wrote:
>===========================================================
>Domains as low as $4.95! Limited Time! ICANN Accredited GoDaddy!
>http://click.topica.com/caab7pQbz8QcsbbBrCSa/ GoDaddy
>===========================================================
>
>Probably a trivial question but I'm interested in your methods for
>mounting boxes on 8 inch pipes. We've used a welded on bracket where the
>owner had welding equipment and did the work. I've also seen 8 inch
>U-bolts but I'm looking for other solutions.
>
>Thanks as always!
>
>Ken Hulet
>
>Ken & Chris Hulet
>Engineering Services Co.
>P.O. Box 4
>Blanchardville, WI 53516
>
>608.523.3726
>
>http://www.revolutionearth.com
>
>===========================================================
>Let University of Phoenix make 2004 your year. Evening, weekend or
>FlexNet® classes over 130 locations. Look into our programs and get the
>degree that gets you going!
>http://click.topica.com/caab6aBbz8QcsbbBrCSf/ UOP
>===========================================================
>
>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
>
----------------------------------------------------------
David Blecker, PE, Executive Director
Seventh Generation Energy Systems, Inc.
608-424-1870 (ph) 424-1810 (fax)
===========================================================
Graduate in less than 13 months with AIUs Online virtual
campus. Classrooms and student service as close as your
computer. Highly accredited, study anytime anywhere.
http://click.topica.com/caab6anbz8Qcsbz9JC9f/ AIU
===========================================================
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list