Adding MX60 to Power Panel [RE-wrenches]

[Allan Sindelar]

Ken,
Take a look at the PS2DC wiring diagrams. A tap from the battery side of the
inverter breaker goes to a floating B+ buss. Then from there you go the the
controller breaker, and from there to the MX60.

Allan at +E


----- Original Message ----- 
From: "Ken Hulet, Engineering Services Co." <Ken.Hulet at redwoodalliance.org>
I know we need to
> add a breaker but do they expect just to add a second wire under a lug
> of the DC250 breaker? Can someone point us in the right direction?
> Thanks.

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------