Adding MX60 to Power Panel [RE-wrenches]

[Kurt Nelson]

-----Original Message-----
From: Jeffery Wolfe, Global Resource Options 

When the power panel comes from the factory with a C40 installed, the
positive on the C40 is wired with a ring terminal onto the bolt that
holds the lug onto the 250A breaker (on the side toward the inverter).

I have always landed the PV on the battery side of the breaker, not the
inverter side.  

Kurt Nelson
 

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------