drawing program [RE-wrenches]

[Kurt Albershardt]

<x-flowed>
--On Wednesday, January 28, 2004 12:48 PM -0800 William Miller <wrmiller at slonet.org> wrote:
>
> Visio can open DWG and DXF formats.  I have only done it a few times, so I am not fully aware of how well it does this.  It will probably choke on 3D drawings or drawings created with newer version of Autocad

My experience with Visio's DWG and DXF support a few years back was not very good.  Opening and then saving an Audocad r13 drawing increased its size by almost 100%, and completely slammed the processor doing so.  I hope they've improved it since then.




> it is not out of the question to view DXF/DWG drawings in Visio.

Plenty of other options available for viewing & printing them.

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------


</x-flowed>