new wire for array wiring? [RE-wrenches]

[Carl Reuter]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Claim your fully stuffed Christmas Stocking now
http://click.topica.com/caacVmdbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------

No,Ray it wasnt tray cable which has been around forever. This stuff is 
supposedly very new product.

William the modules I have been using are Sharp 167s which have an open 
circuit voltage of 29 vdc and Sharp only offers all their 165s, 167s, 
175s and 185s with 4' leads and MC jacks on the ends, which I am sold on 
for series string configuring. At one point they stopped making their 
123s with j boxes and only offered MC connects but quickly realized the 
stupidity of that and now offer j boxes again. Those 167s have a weird 
lip on the frame extrusion designed to fit with some architectural trim 
strips but I think they are getting rid of that lipped extrusion at some 
point also.
William Miller wrote:
> 
> Carl:
> 
> I'm curious, what brand and size of modules are you using?  Do they have 
> 
> junction boxes?
> 
> William Miller
> 
> 
> At 06:04 PM 12/7/2004, you wrote:
> 
> >Wrenches: I recently had an inspector reject my use of USE-2 wire with
> >MC connects on the array end as the primary wire coming from the array
> >to the inside wiring . This was a roof-mounted grid- tie system and what
> >I had done was ran from the array with a pair of USE conductors running
> >along the roof peak, securely fastened, led over the side and led into a
> >jbox immediently behind the siding up under the eave.From there I ran
> 



Land and Sea Solar
po box 1507,Soquel,Ca. 95073

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
4 Free Low-Fat recipes
http://click.topica.com/caacVmebz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------