Mounting boxes on large poles [RE-wrenches]
Jeff Clearwater
clrwater at earthlink.net
Fri Apr 30 23:04:26 PDT 2004
<x-flowed>
===========================================================
Domains as low as $4.95!
Limited Time! ICANN Accredited GoDaddy!
http://click.topica.com/caab8Lhbz8Qcsbz9JC9a/ GoDaddy
===========================================================
Hey Mo,
The powder charges sound interesting. How much are they? How do
they keep for going through the pipe? made out of? rust?
>
>===========================================================
>Give Your Team Access to Their PCs from Anywhere. Increase
>productivity with a secure remote-access solution from
>GoToMyPC Pro. Stay in touch with your office. FREE TRIAL:
>http://click.topica.com/caab6awbz8Qcsa9hBZia/ ExpertCity
>===========================================================
>
>Another method to use for smaller light weight boxes is to use a powder
>charge to "shoot" a threaded head into the pipe. You then secure to the
>heads with washers and nuts. We use this method to mount j-boxes and
>Outback PSPV's or PSSB's to our poles -- typically 8in sch 40 galvy pipe.
>
>Real fast and secure. You can get these at Ace Hardware.
>--
>Mo Rousso
>President
>HelioPower, Inc
>760.451.9374
>www.heliopower.com
>
>===========================================================
>Let University of Phoenix make 2004 your year. Evening,
>weekend or FlexNetÆ classes ñ over 130 locations. Look
>into our programs and get the degree that gets you going!
>http://click.topica.com/caab6aBbz8Qcsa9hBZif/ UOP
>===========================================================
>
>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jeff Clearwater
Village Power Design Associates
http://www.villagepower.com
jeffc at villagepower.com
Sustainable Energy & Water Solutions for Home & Village
NABCEP Certified PV Installer
Office: (413) 256-6777, Cell: (720)480-8455
Fax: (413) 825-0372
61 Baker Road
Shutesbury, MA 01072;
PO Box 115
Boonville, CA 95415
(877) 765-2784
Council Member - Ecovillage Network of the Americas - http://www.ecovillage.org
Advisory Board - Living Routes - Ecovillage Education -
http://www.livingroutes.org
Founder: Ecovillage Research, Development, and Demonstration Program:
http://www.home.earthlink.net/~clrwater/RDD/rdd.html
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
===========================================================
Domains as low as $4.95!
Limited Time! ICANN Accredited GoDaddy!
http://click.topica.com/caab7pQbz8Qcsbz9JC9f/ GoDaddy
===========================================================
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list