FX2024 [RE-wrenches]

[Ken Hulet, Engineering Services Co.]

<x-flowed>
We've seen 1 HP 2-wire pumps here!


On Tuesday, March 2, 2004, at 11:54  AM, Windy Dankoff, Dankoff Solar 
wrote:

> Caution! When dealing with conventional induction-motor pumps (not 
> SQ), don't forget to differentiate between a 2-wire pump (no control 
> box) and a 3-wire pump. The 2-wire does not have a separate start 
> winding and is much more problematic to start. I think these cheapie 
> pumps only exist in 1/3 and 1/2HP sizes.
>
> Windy
>
>
>> cvsolar at aol.com
>> writes:
>> FX2024 is strong enough to run a 1/3 hp well pump with a 240 
>> transformer. The
>>
>> I'm comfortable going up to 1/2 hp on this size inverter. Tranformer 
>> a bit of
>> a drag -but very workable.
>>
>> Don
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
> --^----------------------------------------------------------------
> This email was sent to: Ken.Hulet at redwoodalliance.org
>
> EASY UNSUBSCRIBE click here: 
> http://lists.topica.com/u/?bz8Qcs.bAmY4E.S2VuLkh1
> Or send an email to: RE-wrenches-unsubscribe at topica.com
>
> TOPICA - Start your own email discussion group. FREE!
> http://www.topica.com/partner/tag02/create/index2.html
> --^----------------------------------------------------------------
>
>
>


Ken & Chris Hulet
Engineering Services Co.
P.O. Box 4
Blanchardville, WI 53516

608.523.3726

http://www.revolutionearth.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------



</x-flowed>