FX2024 [RE-wrenches]

[Windy Dankoff, Dankoff Solar]

<x-flowed>
EEK!

Here is a tip, when it isn't too late -- When customer is dealing 
with a pump installer/driller who doesn't accept reality (or 
possibility) of a battery/inverter system, tell him the pump has to 
run on a small generator. In remote-market areas, it is common 
knowledge that a 3-wire pump is necessary in that case.

I also agree with Christopher F, about using a relay-type control 
box, not solid state. It is easy to replace one with another. Relay 
is more forgiving of voltage dips during startup.

Windy


3/3/04, Ken Hulet, Engineering Services Co. wrote:
>We've seen 1 HP 2-wire pumps here!

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------


</x-flowed>