Hialeah KWH meter wiring diagrams [RE-wrenches]

[Kirk Herander, VSE]

Chris,
When I talked to Hialeah last week, thats exactly what they told me was
needed, a 12S, 120 volt meter. Maybe that's what Kurt is using also.
Although Doug P. says it works with a "standard 4 terminal, J5 meter". The
hialeah meters I have in the shop are Form 2S "J4S" type. Maybe the J5 has a
120 volt coil. ...........Corn-fusing!!!!
Kirk
Vermont Solar Engineering
Kirk Herander
North American Board of Certified Energy Practitioners
Certified Solar PV Installer(TM)
Xantrex Certified Dealer Charter Member
NYSERDA-eligible installer
Vermont Solar and Wind Partner

PO Box 697
Burlington, VT. 05402
www.vermontsolar.com
www.backeastsolar.com
800.286.1252 - 802.863.1202
fax 802.863.7908

>
> The type of KWH meter which would be ideal is the form "12S" which is a
> 5 jaw type.
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------