SW spooky generator starting [RE-wrenches]

[William Miller]

<x-flowed>
 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save on inkjet and toner, and get free shipping on orders over $50.
http://click.topica.com/caacAsfbz8Qcsbz9JC9a/Inksoutlet
-------------------------------------------------------------------

Kids:

I have, yet again, a client with an SW system that has random generator 
starting/stopping problems.  This is an SW system with version 4.10 
firmware.  The generator is possibly starting for no reason, and it is 
definitely failing to stop when it should.

I had this problem before with an earlier version of firmware.  I brought 
this to the attention of Trace and after some testing, they confirmed there 
was a problem and corrected it in the next Rev.

This generator is a mobile Onan, requiring both a start and stop 
closures.  This may have something to do with our starting problems (or 
more prevalent, stopping problems).

Any advice is appreciated.

William Miller



__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600     Fax: 805-438-4607
email: wrmiller at slonet.org
http://mpandc.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP10
Spreadsheet: Quatro Pro 10
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
                                     H. L. Mencken
__________________________________________________________________ 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need cash fast? Get a $500 CASH ADVANCE overnight! Let 
YourCashCentral get you the cash you need.
http://click.topica.com/caacxycbz8Qcsbz9JC9f/MyOnlinePayday
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------




</x-flowed>