adding MX60 to power panel [RE-wrenches]

[Ron Stauffer]

I also land the PV positive output of controller on the battery side of the DC250 breaker.  Never thought it really mattered until I was doing a service check and was taking the front cover off the DC250.  When the cover slid off it turned the breaker off but the inverter didn't shut off.  The PV output was close to the AC loads so the loads were being carried direct off of the PV.

I connect the PV and any DC loads off of the battery side by removing the bolt that holds the 4/0 lug and placing an add on neutral bar from an AC main panel and replacing with a longer bolt through the add on.  Works well and allows easy future taps.

Ron Stauffer

[Non-text portions of this message have been removed]

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------