Lags vs. Timberloks [RE-wrenches]
Greg Egan
gegan at renewalaska.com
Sun Oct 19 08:38:18 PDT 2003
<x-flowed>
Bruce,
The teflon based thread sealant that plumbers use works well to prevent
stainless from galling. Never used it in a marine environment but you
might try it and see.
Best,
Greg
Bruce Geddes wrote:
>>>Use of a lubricant or thread-cutting oil seems to
>>>minimize this problem.
>>
>>Thanks to a few of the aforementioned Makita incidents and a little
>
> education from my local fastener supplier, I now carry some anti-seize
> compound in my bag. The nickel variety is a bit pricey, but works at higher
> temperatures and looks a little less out of place on stainless hardware.
>
>
> The stainless nylocks I use come with a warning on the box to use a
> luricant, even when using hand tools. They suggest a graphite based type
> but I have concerns with electrolysis in marine environments with any
> graphite and aluminum.
>
> Bruce Geddes
> PowerOn
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
> --^----------------------------------------------------------------
> This email was sent to: gegan at renewalaska.com
>
> EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.baABrE.Z2VnYW5A
> Or send an email to: RE-wrenches-unsubscribe at topica.com
>
> TOPICA - Start your own email discussion group. FREE!
> http://www.topica.com/partner/tag02/create/index2.html
> --^----------------------------------------------------------------
>
>
>
--
Alaska Renewable Energy
981 Gold Mine Trail Fairbanks, Alaska 99712
Phone: 907-457-4299; Fax: 907-457-4290; Email: gegan at renewalaska.com
URL: http://www.renewalaska.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list