Lags vs. Timberloks [RE-wrenches]
Darryl Thayer
daryl_solar at yahoo.com
Sun Oct 19 14:59:36 PDT 2003
I am not so sure about thread cutting oil. But I am
concerned about gauling. I use SS bolts and nuts on
battery connections, have found that they sometimes
get tight before they tighten up. Making a hazardous
connection.
Please keep sharing information on this topic.
Daryl
--- Bruce Geddes <b.geddes at clear.net.nz> wrote:
> > > Use of a lubricant or thread-cutting oil seems
> to
> > > minimize this problem.
> >
> > Thanks to a few of the aforementioned Makita
> incidents and a little
> education from my local fastener supplier, I now
> carry some anti-seize
> compound in my bag. The nickel variety is a bit
> pricey, but works at higher
> temperatures and looks a little less out of place on
> stainless hardware.
> >
>
> The stainless nylocks I use come with a warning on
> the box to use a
> luricant, even when using hand tools. They suggest
> a graphite based type
> but I have concerns with electrolysis in marine
> environments with any
> graphite and aluminum.
>
> Bruce Geddes
> PowerOn
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette:
> http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios:
> www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
--^----------------------------------------------------------------
> This email was sent to: daryl_solar at yahoo.com
>
> EASY UNSUBSCRIBE click here:
> http://topica.com/u/?bz8Qcs.bd5Ekw.ZGFyeWxf
> Or send an email to:
> RE-wrenches-unsubscribe at topica.com
>
> TOPICA - Start your own email discussion group.
> FREE!
>
http://www.topica.com/partner/tag02/create/index2.html
>
--^----------------------------------------------------------------
>
>
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list